The Inspector requires 110v and simply ties into your existing stop-button circuit to stop the machine using a relay. Depending on the wiring of your machine, there is a second relay that can be used if a reset signal is needed to reset your existing controls after a stop.

In order to physically stop your machine, it must be equipped with a “kick-out” or de-clutching cylinder.

The Inspector control-box and two cams w/limit-switches will need to be installed on your machine. Details of probe-installation can vary from application/machine.

FORCE can visit your facility and evaluate your machine for free if you are unsure of the controls and wiring of your machine.